DAP VPA-150 150W 100 Volt Power Amplifier MSRP 419,00 EUR
our price 298,00 EUR

incl. 20 % Tax excl.
Weight: 20.00

Product No.: D4112
Print product data sheet
Shipping time: on stock on stock
DAP VPA-150 150W 100 Volt Power Amplifier
Bild vergrössern
DAP VPA-150 150W 100 Volt Power Amplifier
Bild vergrössern

DAP VPA-150 150W / 100 Volt Power Amplifier
The DAP 100 volt Palladium Amplifier series is a long requested group of audioproducts for fixed installations and any other situation that requires a 100 Volt system. The series incorporates 3 amplifier models ranging from an entry-level 60 Watts amplifier to a full 250 Watts - powerhouse! All three amps have an on-board audio-mixer with pre-amp and tonecontrol facilities. The - Chime button/funtion is the finishing touch on these systems with an excellent price/quality balance.
Features:
• Two microphone inputs, two auxiliary inputs and two AUX out for line.
•Transformer isolated 240V, 110V, 70V and 4-16Ohms speaker outputs.
•Muting function.
•Individual volume control and master volume control.
•Low and high tone control
•Output circuit shorting protection & alarm.
•Chime output.

Frontpanel:
•Power switch.
•Power indicator LED
•LED level meter
•Clip
•Z1 switch
•Z2 switch
•Z3 switch
•Z4 switch
•Master volume control
•Treble control
•Bass control
•AUX2 volume control
• AUX1 volume control
•MIC2 volume control
•MIC1 volume control
•MIC2 input jack
•MIC1 input jack
•Chime rest

Chime:
To further enhance the system a chime facility can be added as an option, the chime output can be activated by any input.

Technical Info
Model: VPA-60 VPA-150 VPA-250
Output:60W 150W 250W
Output regulation: Less than 3dB, no load to full load
Speaker output:Balanced 4-16 Ohm, 70V, 110V, 240V
AUX output:600 Ohm 1V(0dBV)
Inputs:Mic1,2/600 Ohm, 2.0mV(-54dBV), unbalanced AUX1,2/10k Ohm, 250mV(-10dBV), unbalanced Freq. resp. 100HZ-16kHZ
Distortion:Less than 0.1% at 1kHz, 1/3 rated power
Signal to noise ratio: Microphone1,2 66dB AUX1,2 70dB
Tone: Bass: +- 10dB at 100 Hz Treble: + -10dB at 10 Hz
Protection:AC fuse; DC voltage, overload and short circuit.
Muting function:Mic 1 overrides, other input signals with 0~-30dB attenuation.
Power Requirements:AC 220~240V/50~60Hz
Power Consumption:100W 200W 320W
Dimensions: 483mm x 400mm x 89mm 19 inch x 15 inch x 3.4 inch
Gross Weight: 20 Kg

This Product was added to our catalogue on Thursday, 16. November 2006.
Parse Time: 0.117s