Dynacord D-Lite SUB 112 400W Subwoofer MSRP 825,00 EUR
our price 745,00 EUR

incl. 20 % Tax excl.
Weight: 20.00

Product No.: D113134
Print product data sheet
Shipping time: 3-4 Days 3-4 Days
Dynacord D-Lite SUB 112 400W Subwoofer
Bild vergrössern
Dynacord D-Lite SUB 112 400W Subwoofer
Bild vergrössern

DYNACORD´s SUB 112 is a vented, direct radiating cabinet, equipped with the high-power DYNACORD DND12S400 neodymium transducer. The conical vent system shows significantly less distortion and lower air noise at low frequencies than common circular vent openings.

The SUB 112 contains a passive filter, 6 dB/oct., that suppresses high frequencies. Appropriate fullrange cabinets, e.g. DYNACORD’s D 8 can therefore be directly connected in parallel to the SUB 112 if an extended bass reproduction is required. You just have to connect the SUB 112 and the D 8 with a regular Speakon cable in parallel.

The SUB 112 cabinet is made of 15mm birch plywood. All corner joints and braces are grooved and glued. The cabinet´s surface is painted with a 2-K laquer finish . The acoustic foam front on a powder coated steel grille protects the DND12S400 woofer against damage during transport and bad environmental conditions. The connector panel uses two 4-pole Speakon connectors (INPUT/THRU) for a safe connection and easy daisy-chaining to other cabinets. The pin assignment is 1+/1-. Pins 2+ and 2- are also connected between the two Speakon connectors. A pole-mount flange allows easy speaker-on-a-stick applications. Please always take care that every speaker stack has been mechanically secured against accidental falling down. Please always consult a certified structural engineer for correct and safe setup methods.

The cabinet is equipped with four large rubber feet. Two handles allow easy and safe transport. A protective cover is available as an optional accessory.
Spezifikationen :
  • Cabinet : Subwoofer
  • Configuration : Built-In Hi-Cut Filter
  • Nominal impedance : 8 Ohms
  • Rated power RMS : 400 Watts
  • Program power : 800 Watts
  • Peak power : 1600 Watts
  • SPL 2,83 V / 1m 1 W / 8 Ohm : 92 dB
  • Max. SPL 1m (calculated with peak power) : 124 dB
  • Frequency range ( -10dB ) : 43Hz - 350Hz
  • Passive crossover frequency : 124 Hz
  • Component SUB : DND12S400
  • Connectors SUB : 1+, 1-
  • Wired through : 2+, 2-
  • Connector model : Speakon NL4MPR
  • Dimensions (WxHxD) mm : 545 x 380 x 445 mm
  • Shipping weight : 22 kg
  • Net weight : 20 kg
  • Enclosure material : Birch Plywood
  • Finish : 2-Component Paint
  • Grille : Powder coated steel, Acoustic Foam
  • Handles : 4
  • Castors : 4


For further information, please visit the homepage of this product.
This Product was added to our catalogue on Saturday, 26. July 2008.
Ana Popovic
Parse Time: 0.626s