MUSIC-CENTER-FILIBE - crate CA 30DG Taos Acoustic Combo CRATE CA-30DG Taos Acoustic Combo Amplifier 30W CA30DG

• Main page • Advanced Search • Newsletter • Shipping costs • Special offers •

Categories

Guitars

Guitar Amps
-   Blackheart
-   Crate
    Combo Amps
      Solid-state Combos
      Tube combos
      Acoustic Combos
      Battery Combos
    Head Amps
    Guitar Cabinets
-   Blackstar
-   Hartke
-   Brunetti
-   TECH 21
-   Hughes & Kettner
-   Krank Amps
-   The Valve
-   SR Technology

Bass Amps

Guitar Effects

Bass Guitar Effects

Keyboards & Pianos

Drums & Percussions

Drum Cymbals

PA Systems

Conference Systems

100V P.A Systems

Light Systems

Beamers & Projectors

DJ-Equiment

Recording

Accessories

Information about manufacturer

Crate
Crate Homepage
More Products

More about...

Shipping & Returns

Privacy Notice

General Terms & Conditions

Adress & Bank Details

Contact

Informations

Sitemap

Reviews

Review this product!

4 articles in this categorie

[next>]

[last>>]

CRATE CA-30DG Taos Acoustic Combo Amplifier 30W

MSRP 299,00 EUR
our price 228,00 EUR
incl. 20 % Tax excl.
Weight: 12.00

Product No.: CA30DG

Print product data sheet

Shipping time:

1-3 Weeks

CRATE CA-30DG Taos Acoustic Combo Amplifier 30W

Crate is introducing an entirely new range of acoustic amplifiers. The technology in the new Crate acoustic series is unique, with preamp circuits you can tailor for piezo or active systems. Crate uses special studio monitor-style speakers with polypropylene cones and rubber surrounds in ported cabinets for tight, even bass response. Every CA amp has a high frequency component for crisp, clear highs. All CA models include a wide array of reverbs, delays, chorus and multiple effects settings.
1: Power. Use this switch to apply power to the amplifier: the amp is on when the top of the switch is depressed, off when the bottom of the switch is depressed. The switch illuminates when the amp is on.
2: Line Out. Use this jack to connect a high impedance, unbalanced line level signal to a house sound board, a recording console or another amplifier.
3: Insert. Use this jack to add external effects to the signal. The ring = send (line out), tip = return (line in), sleeve = ground. This jack can also be used to “chain” multiple amplifiers together, since connecting to this jack does not interrupt the signal going to the amplifier. (See the illustrations on page 5 for more information.)
4: Effects Level. Use this control to adjust the amount of digital signal processing applied to the output signal.
5: Effects Mode. Use this control to select the type of digital signal processing applied to the output signal. (See the section entitled “The DSP Section” on page 6 for more information.)
6: High. This serves as the treble control for both channels. Adjust this control so your high notes and harmonic overtones are lively but not overpowering.
7: Contour. Use this control to set the center point of the mid control. This control should be set at the frequency which gives you the most natural midrange tones.
8: Mid. This serves as the midrange control for both channels. Adjust this control to get the best projection and midrange tones for your instrument. The center point of the mid control is chosen by the setting of the contour control (#7).
9: Low. This serves as the bass control for both channels. Adjust this control to get the best sounding bass response for your instrument. Excessive boost of the low control can cause an unnatural howling (acoustic feedback from your instrument) and should be avoided.
11,13:Input 2, Input 1. The signal output from your acoustic instrument, tape player, rhythm machine, high-Z microphone or other source may be connected to either or both of these jacks by means of a shielded signal cable. Each of the input jacks is governed by its corresponding gain control (#10 for Input 2, #12 for Input 1). The signals from these two jacks are summed together after their gain stages.
10,12:Gain 2, Gain 1. Use these controls to set the input gain level for the corresponding input jack. These controls set the level of the input signal and serve as the amplifier’s volume controls.
14: AC Line Cord. (Rear panel, not shown) The grounded power cord should only be plugged into a grounded power outlet that meets all applicable electrical codes and is compatible with the voltage, power, and frequency requirements stated on the rear panel. Do not attempt to defeat the safety ground connection.
Technical Description :

Output power rating: 30 watts RMS @ 1% distortion
High: +/-15dB @ 10kHz
Mid: +/-15dB @ 400 1.2kHz (Contour)
Low: +/-15dB @ 80Hz
Input impedance: 1.5M ohm
Input sensitivity: 20mV RMS
Sens. to line out: 20mV
Max input signal: 10v RMS (28v peak to peak)
Insert jack: line out .7v RMS, line in .7v RMS
Insert jack input impedance: 44k ohm
Insert jack output impedance: 2.2k ohm
Line out output impedance: 2.2k ohm (Lo-Z), 2.2k ohm (Hi-Z)
Internal speaker: 8 in. poly cone coaxial with dome tweeter; 4 ohms; 50 watts; 1 voice coil
Power requirements: 120VAC, 60Hz, 50VA 100/115VAC, 50/60Hz, 50VA 230VAC, 50/60Hz, 50VA
Size and Weight: 13 in. H x 15 in. W x 12 in. D, 30 lbs

For further information, please visit the homepage of this product.

Shopping Cart

You do not have any products in your shopping cart yet.

Welcome back !

Password forgotten?

New Products

DAP Audio Stage-Amp 4.4 2x2200W SMPS Power Amplifier

MSRP 1.260,00 EUR
our price 945,00 EUR
incl. 20 % Tax excl.

Info

Customer group:Guest

Languages

Template by Hartmut Frings www.hartmutfrings.de