Warwick Jonas Hellborg Signature Serie JH PR40 Bass Preamp MSRP 2.245,00 EUR
our price 1.875,00 EUR

incl. 20 % Tax excl.
Weight: 4.50

Product No.: WJHPR40
Print product data sheet
Shipping time: please Call please Call
Warwick Jonas Hellborg Signature Serie JH PR40 Bass Preamp
Bild vergrössern
Warwick Jonas Hellborg Signature Serie JH PR40 Bass Preamp
Bild vergrössern


The Hellborg Preamp delivers extreme headroom. That means absolutely minimal noise and a capacity to deal with transients and peaks like no other bass amp before. It is designed with the quality and circuitry solutions found in the greatest recording consoles. In fact the transformer balanced DI out, although normally used to feed the signal to a PA system, is designed as direct to tape or disc recording output. There are both high and low impedance inputs provided through a combo- ¼“ (high impedance)/XLR (low impedance) jack. The EQ section provides shelving EQ for high (10kHz) and low band (60Hz) and an inductive (coil based) EQ for the mids with stepped (fixed) frequency and continuously variable gain. Choices of frequencies are as follows: 110, 300 and 800Hz for low mids, 1.5, 3 and 5 kHz for high mids. All transformers and coils are optimally shielded in MU-metal housing. Whether passive or active the Hellborg Preamp will make your bass sound better.
Input : Neutrik “combo” jack (1/4” and XLR)
Clip Indicator :Green (correct operational level) Red (clipping)
Input Gain : -6 dB to +60 dB
Input Impedance : ¼” – 500k Ohm ,XLR – 600 Ohm
EQ BASS : 40 Hz, +/-18 dB
EQ LO-MID : 110 Hz, 300 Hz or 800 Hz (selectable), +/-15 dB
EQ HI-MID : 1,5 kHz, 3 kHz or 5 kHz (selectable), +/-15 dB
EQ TREBLE : 15 kHz, +/-18 dB
DI Output : XLR transformer balanced (0 dB, 600 Ohms)
Tuner Output : +4 dB
Line Output : 0 dB
Effects Send : +4/-10 dB
Effects Return :+4/-10 dB
Front Controls / Switches : PAD -20 dB
Gain
EQ (On/Off)
Bass
LO-MID Level
LO-MID FREQ (110 Hz, 300 Hz or 800 Hz)
HI-MID Level
HI-MID FREQ (1,5 kHz, 3 kHz or 5 kHz)
Treble
Master
Mute
Power (On/Off)
Back Controls / Switches : Voltage Selector (115 / 230 V)
Effects Loop Level Selector
Effect Balance (Dry/Wet)
DI Switch (PRE EQ/EFF, POST EQ / PRE EFF, POST EQ/EFF)
DI Level (+/-6 dB)
Weight 10 lb (4,5 kg)
Dimensions (W/H/D) 19” / 1RU / 9,2" (233 mm)

For further information, please visit the homepage of this product.
This Product was added to our catalogue on Thursday, 28. June 2007.
Ana Popovic
Parse Time: 0.418s